Complex
Primitive
ActivityDefinition
CapabilityStatement
CodeSystem
Composition
ConceptMap
Encounter
Library
List
Measure
MessageHeader
Observation
Patient
PlanDefinition
Questionnaire
Resource
ServiceDefinition
StructureDefinition
StructureMap
ValueSet
default
Base StructureDefinition for QuestionnaireResponse Resource
QuestionnaireResponse
Path
QuestionnaireResponse
Id
QuestionnaireResponse
Cardinality
0 - *
Definition
A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.
Comment
The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.
Constraint
dom-2 [error]
If the resource is contained in another resource, it SHALL NOT contain nested Resources
dom-1 [error]
If the resource is contained in another resource, it SHALL NOT contain any narrative
dom-4 [error]
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
dom-3 [error]
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
Path
QuestionnaireResponse.identifier
Id
QuestionnaireResponse.identifier
Type
Cardinality
0 - 1
Definition
A business identifier assigned to a particular completed (or partially completed) questionnaire.
Comment
Requirements
Used for tracking, registration and other business purposes.
Path
QuestionnaireResponse.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
QuestionnaireResponse.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
QuestionnaireResponse.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.basedOn
Id
QuestionnaireResponse.basedOn
Type
Cardinality
0 - *
Definition
The order, proposal or plan that is fulfilled in whole or in part by this QuestionnaireResponse. For example, a ProcedureRequest seeking an intake assessment or a decision support recommendation to assess for post-partum depression.
Comment
Requirements
Supports traceability of responsibility for the action and allows linkage of an action to the recommendations acted upon.
Path
QuestionnaireResponse.basedOn.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.basedOn.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.basedOn.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.basedOn.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.parent
Id
QuestionnaireResponse.parent
Type
Cardinality
0 - *
Definition
A procedure or observation that this questionnaire was performed as part of the execution of. For example, the surgery a checklist was executed as part of.
Comment
Composition of questionnaire responses will be handled by the parent questionnaire having answers that reference the child questionnaire. For relationships to referrals, and other types of requests, use basedOn.
Path
QuestionnaireResponse.parent.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.parent.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.parent.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.parent.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.questionnaire
Id
QuestionnaireResponse.questionnaire
Type
Cardinality
0 - 1
Definition
The Questionnaire that defines and organizes the questions for which answers are being provided.
Comment
If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).
Requirements
Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.
Path
QuestionnaireResponse.questionnaire.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.questionnaire.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.questionnaire.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.questionnaire.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.status
Id
QuestionnaireResponse.status
Type
Cardinality
1 - 1
Definition
The position of the questionnaire response within its overall lifecycle.
Comment
This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.
Requirements
The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished.
Path
QuestionnaireResponse.subject
Id
QuestionnaireResponse.subject
Type
Cardinality
0 - 1
Definition
The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information.
Comment
If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.
Requirements
Allows linking the answers to the individual the answers describe. May also affect access control.
Path
QuestionnaireResponse.subject.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.subject.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.subject.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.subject.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.context
Id
QuestionnaireResponse.context
Type
Cardinality
0 - 1
Definition
The encounter or episode of care with primary association to the questionnaire response.
Comment
A questionnaire that was initiated during an encounter but not fully completed during the encounter would still generally be associated with the encounter.
Requirements
Provides context for the information that was captured. May also affect access control.
Path
QuestionnaireResponse.context.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.context.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.context.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.context.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.authored
Id
QuestionnaireResponse.authored
Type
Cardinality
0 - 1
Definition
The date and/or time that this set of answers were last changed.
Comment
May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.
This element is optional to allow for systems that may not know the value, however it SHOULD be populated if possible.
Requirements
Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.
Path
QuestionnaireResponse.author
Id
QuestionnaireResponse.author
Type
Cardinality
0 - 1
Definition
Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.
Comment
Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated.
Requirements
Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.
Path
QuestionnaireResponse.author.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.author.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.author.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.author.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.source
Id
QuestionnaireResponse.source
Type
Cardinality
0 - 1
Definition
The person who answered the questions about the subject.
Comment
If not specified, no inference can be made about who provided the data.
Requirements
When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.
Path
QuestionnaireResponse.source.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.source.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.source.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.source.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.item
Id
QuestionnaireResponse.item
Type
Cardinality
0 - *
Definition
A group or question item from the original questionnaire for which answers are provided.
Comment
Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
qrs-1 [error]
Nested item can't be beneath both item and answer
Path
QuestionnaireResponse.item.linkId
Id
QuestionnaireResponse.item.linkId
Type
Cardinality
1 - 1
Definition
The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.
Comment
Requirements
Items can repeat in the answers, so a direct 1..1 correspondence by position may not exist - requiring correspondence by identifier.
Path
QuestionnaireResponse.item.definition
Id
QuestionnaireResponse.item.definition
Type
Cardinality
0 - 1
Definition
A reference to an [ElementDefinition](elementdefinition.html) that provides the details for the item.
Comment
The ElementDefinition must be in a [StructureDefinition](structuredefinition.html) or a [DataElement](dataelement.html), and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].
There is no need for this element if the item pointed to by the linkId has a definition listed.
Requirements
A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.
Path
QuestionnaireResponse.item.subject
Id
QuestionnaireResponse.item.subject
Type
Cardinality
0 - 1
Definition
More specific subject this section's answers are about, details the subject given in QuestionnaireResponse.
Comment
Requirements
Sometimes a group of answers is about a specific participant, artifact or piece of information in the patient's care or record, e.g. a specific Problem, RelatedPerson, Allergy etc.
Path
QuestionnaireResponse.item.subject.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
QuestionnaireResponse.item.subject.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
QuestionnaireResponse.item.subject.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
QuestionnaireResponse.item.subject.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
QuestionnaireResponse.item.answer
Id
QuestionnaireResponse.item.answer
Type
Cardinality
0 - *
Definition
The respondent's answer(s) to the question.
Comment
The value is nested because we cannot have a repeating structure that has variable type.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
QuestionnaireResponse.item.answer.value[x]
Id
QuestionnaireResponse.item.answer.value[x]
Type
Cardinality
0 - 1
Definition
The answer (or one of the answers) provided by the respondent to the question.
Comment
More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions.
Requirements
Ability to retain a single-valued answer to a question.
Path
QuestionnaireResponse.item.answer.item
Id
QuestionnaireResponse.item.answer.item
Type
Cardinality
0 - *
Definition
Nested groups and/or questions found within this particular answer.
Comment
Requirements
It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.
Path
QuestionnaireResponse.item.item
Id
QuestionnaireResponse.item.item
Type
Cardinality
0 - *
Definition
Questions or sub-groups nested beneath a question or group.
Comment
Requirements
Reports can consist of complex nested groups.