Complex
Primitive
ActivityDefinition
CapabilityStatement
CodeSystem
Composition
ConceptMap
Encounter
Library
List
Measure
MessageHeader
Observation
Patient
PlanDefinition
Questionnaire
Resource
ServiceDefinition
StructureDefinition
StructureMap
ValueSet
default
Base StructureDefinition for AdverseEvent Resource
AdverseEvent
Path
AdverseEvent
Id
AdverseEvent
Cardinality
0 - *
Definition
Actual or potential/avoided event causing unintended physical injury resulting from or contributed to by medical care, a research study or other healthcare setting factors that requires additional monitoring, treatment, or hospitalization, or that results in death.
Comment
Constraint
dom-2 [error]
If the resource is contained in another resource, it SHALL NOT contain nested Resources
dom-1 [error]
If the resource is contained in another resource, it SHALL NOT contain any narrative
dom-4 [error]
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
dom-3 [error]
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
Path
AdverseEvent.identifier
Id
AdverseEvent.identifier
Type
Cardinality
0 - 1
Definition
The identifier(s) of this adverse event that are assigned by business processes and/or used to refer to it when a direct URL reference to the resource itsefl is not appropriate.
Comment
Path
AdverseEvent.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
category
AE | PAE
An adverse event is an event that caused harm to a patient, an adverse reaction is a something that is a subject-specific event that is a result of an exposure to a medication, food, device or environmental substance, a potential adverse event is something that occurred and that could have caused harm to a patient but did not
Path
AdverseEvent.category
Id
AdverseEvent.category
Type
Cardinality
0 - 1
Definition
The type of event which is important to characterize what occurred and caused harm to the subject, or had the potential to cause harm to the subject.
Comment
Path
AdverseEvent.type
Id
AdverseEvent.type
Type
Cardinality
0 - 1
Definition
This element defines the specific type of event that occurred or that was prevented from occurring.
Comment
Path
AdverseEvent.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.subject
Id
AdverseEvent.subject
Type
Cardinality
0 - 1
Definition
This subject or group impacted by the event. With a prospective adverse event, there will be no subject as the adverse event was prevented.
Comment
Path
AdverseEvent.subject.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.subject.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.subject.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.subject.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.subject.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.subject.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.subject.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.subject.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.subject.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.subject.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.subject.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.subject.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.subject.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.subject.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.subject.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.date
Id
AdverseEvent.date
Type
Cardinality
0 - 1
Definition
The date (and perhaps time) when the adverse event occurred.
Comment
Path
AdverseEvent.reaction
Id
AdverseEvent.reaction
Type
Cardinality
0 - *
Definition
Includes information about the reaction that occurred as a result of exposure to a substance (for example, a drug or a chemical).
Comment
Path
AdverseEvent.reaction.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.reaction.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.reaction.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.reaction.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.reaction.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.reaction.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.reaction.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.reaction.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.reaction.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.location
Id
AdverseEvent.location
Type
Cardinality
0 - 1
Definition
The information about where the adverse event occurred.
Comment
Path
AdverseEvent.location.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.location.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.location.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.location.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.location.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.location.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.location.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.location.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.location.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.location.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.location.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.location.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.location.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.location.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.location.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.seriousness
Id
AdverseEvent.seriousness
Type
Cardinality
0 - 1
Definition
Describes the seriousness or severity of the adverse event.
Comment
Path
AdverseEvent.seriousness.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.seriousness.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.seriousness.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.seriousness.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.seriousness.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.seriousness.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.outcome
Id
AdverseEvent.outcome
Type
Cardinality
0 - 1
Definition
Describes the type of outcome from the adverse event.
Comment
Path
AdverseEvent.outcome.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.outcome.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.outcome.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.outcome.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.outcome.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.outcome.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.recorder
Id
AdverseEvent.recorder
Type
Cardinality
0 - 1
Definition
Information on who recorded the adverse event. May be the patient or a practitioner.
Comment
Path
AdverseEvent.recorder.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.recorder.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.recorder.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.recorder.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.recorder.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.recorder.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.recorder.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.recorder.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.recorder.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.eventParticipant
Id
AdverseEvent.eventParticipant
Type
Cardinality
0 - 1
Definition
Parties that may or should contribute or have contributed information to the Act. Such information includes information leading to the decision to perform the Act and how to perform the Act (e.g. consultant), information that the Act itself seeks to reveal (e.g. informant of clinical history), or information about what Act was performed (e.g. informant witness).
Comment
Path
AdverseEvent.eventParticipant.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.eventParticipant.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.eventParticipant.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.eventParticipant.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.description
Id
AdverseEvent.description
Type
Cardinality
0 - 1
Definition
Describes the adverse event in text.
Comment
Path
AdverseEvent.suspectEntity
Id
AdverseEvent.suspectEntity
Type
Cardinality
0 - *
Definition
Describes the entity that is suspected to have caused the adverse event.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
AdverseEvent.suspectEntity.instance
Id
AdverseEvent.suspectEntity.instance
Type
Cardinality
1 - 1
Definition
Identifies the actual instance of what caused the adverse event. May be a substance, medication, medication administration, medication statement or a device.
Comment
Path
AdverseEvent.suspectEntity.instance.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.suspectEntity.instance.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.suspectEntity.instance.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.suspectEntity.instance.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.suspectEntity.causality
Id
AdverseEvent.suspectEntity.causality
Type
Cardinality
0 - 1
Definition
causality1 | causality2.
Comment
Path
AdverseEvent.suspectEntity.causalityAssessment
Id
AdverseEvent.suspectEntity.causalityAssessment
Type
Cardinality
0 - 1
Definition
assess1 | assess2.
Comment
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.suspectEntity.causalityAssessment.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.suspectEntity.causalityProductRelatedness
Id
AdverseEvent.suspectEntity.causalityProductRelatedness
Type
Cardinality
0 - 1
Definition
AdverseEvent.suspectEntity.causalityProductRelatedness.
Comment
Path
AdverseEvent.suspectEntity.causalityMethod
Id
AdverseEvent.suspectEntity.causalityMethod
Type
Cardinality
0 - 1
Definition
method1 | method2.
Comment
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.suspectEntity.causalityMethod.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.suspectEntity.causalityAuthor
Id
AdverseEvent.suspectEntity.causalityAuthor
Type
Cardinality
0 - 1
Definition
AdverseEvent.suspectEntity.causalityAuthor.
Comment
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.suspectEntity.causalityAuthor.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.suspectEntity.causalityResult
Id
AdverseEvent.suspectEntity.causalityResult
Type
Cardinality
0 - 1
Definition
result1 | result2.
Comment
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
AdverseEvent.suspectEntity.causalityResult.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
AdverseEvent.subjectMedicalHistory
Id
AdverseEvent.subjectMedicalHistory
Type
Cardinality
0 - *
Definition
AdverseEvent.subjectMedicalHistory.
Comment
Path
AdverseEvent.subjectMedicalHistory.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.subjectMedicalHistory.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.subjectMedicalHistory.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.referenceDocument
Id
AdverseEvent.referenceDocument
Type
Cardinality
0 - *
Definition
AdverseEvent.referenceDocument.
Comment
Path
AdverseEvent.referenceDocument.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.referenceDocument.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.referenceDocument.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.referenceDocument.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.study
Id
AdverseEvent.study
Type
Cardinality
0 - *
Definition
AdverseEvent.study.
Comment
Path
AdverseEvent.study.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.study.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.study.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
AdverseEvent.study.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
AdverseEvent.study.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
AdverseEvent.study.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
AdverseEvent.study.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
AdverseEvent.study.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
AdverseEvent.study.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
AdverseEvent.study.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
AdverseEvent.study.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
AdverseEvent.study.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
AdverseEvent.study.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
AdverseEvent.study.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
AdverseEvent.study.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.