Summary
Request & Response
Diagnostics
Care Provision
Medications
Workflow
Entities
Management
Individuals
General
Billing
Support
Payment
Security
Other
Conformance
Terminology
Documents
Definitional Artifacts
Medication Definition
Evidence-Based Medicine
Quality Reporting & Testing
Public Health & Research
Complex
Primitive
ActivityDefinition
CanonicalResource
CapabilityStatement
ChargeItemDefinition
Claim
CodeSystem
Composition
ConceptMap
CoverageEligibilityRequest
DocumentReference
Encounter
EpisodeOfCare
Group
Library
List
Measure
MedicinalProductDefinition
MessageHeader
NamingSystem
Observation
Patient
PlanDefinition
Resource
SpecimenDefinition
StructureDefinition
StructureMap
Subscription
ValueSet
default
The Measure resource provides the definition of a quality measure.
Measure
Path
Measure
Id
Measure
Cardinality
0 - *
Definition
The Measure resource provides the definition of a quality measure.
Comment
Constraint
cnl-0 [warning]
Name should be usable as an identifier for the module by machine processing applications such as code generation
mea-1 [error]
Stratifier SHALL be either a single criteria or a set of criteria components
Path
Measure.url
Id
Measure.url
Type
Cardinality
0 - 1
Definition
An absolute URI that is used to identify this measure when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which an authoritative instance of this measure is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the measure is stored on different servers.
Comment
Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.
The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in [Technical and Business Versions](resource.html#versions).
In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the [meta.source](resource.html#meta) element to indicate where the current master source of the resource can be found.
Requirements
Allows the measure to be referenced by a single globally unique identifier.
Constraint
cnl-1 [warning]
URL should not contain | or # - these characters make processing canonical references problematic
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier
Id
Measure.identifier
Type
Cardinality
0 - *
Definition
A formal identifier that is used to identify this measure when it is represented in other formats, or referenced in a specification, model, design or an instance.
Comment
Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this measure outside of FHIR, where it is not possible to use the logical URI.
Requirements
Allows externally provided and/or usable business identifiers to be easily associated with the module.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Measure.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Measure.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.version
Id
Measure.version
Type
Cardinality
0 - 1
Definition
The identifier that is used to identify this version of the measure when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the measure author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.
Comment
There may be different measure instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the measure with the format [url]|[version]. The version SHOULD NOT contain a '#' - see [Business Version](resource.html#bv-format).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.versionAlgorithm[x]
Id
Measure.versionAlgorithm[x]
Type
Cardinality
0 - 1
Definition
Indicates the mechanism used to compare versions to determine which is more current.
Comment
If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.name
Id
Measure.name
Type
Cardinality
0 - 1
Definition
A natural language name identifying the measure. This name should be usable as an identifier for the module by machine processing applications such as code generation.
Comment
The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Requirements
Support human navigation and code generation.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cnl-0
Path
Measure.title
Id
Measure.title
Type
Cardinality
0 - 1
Definition
A short, descriptive, user-friendly title for the measure.
Comment
This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.subtitle
Id
Measure.subtitle
Type
Cardinality
0 - 1
Definition
An explanatory or alternate title for the measure giving additional information about its content.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.status
Id
Measure.status
Type
Cardinality
1 - 1
Definition
The status of this measure. Enables tracking the life-cycle of the content.
Comment
Allows filtering of measures that are appropriate for use versus not.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Binding
Strength
required
Description
The lifecycle status of an artifact.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.experimental
Id
Measure.experimental
Type
Cardinality
0 - 1
Definition
A Boolean value to indicate that this measure is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.
Comment
Allows filtering of measures that are appropriate for use versus not.
Requirements
Enables experimental content to be developed following the same lifecycle that would be used for a production-level measure.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
subject[x]
E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device
Path
Measure.subject[x]
Id
Measure.subject[x]
Type
Cardinality
0 - 1
Definition
The intended subjects for the measure. If this element is not provided, a Patient subject is assumed, but the subject of the measure can be anything.
Comment
The subject of the measure is critical in interpreting the criteria definitions, as the logic in the measures is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.
Binding
Strength
extensible
Description
The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.subject[x].CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.subject[x].CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.subject[x].CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.subject[x].CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.subject[x].CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.subject[x].CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.basis
Id
Measure.basis
Type
Cardinality
0 - 1
Definition
The population basis specifies the type of elements in the population. For a subject-based measure, this is boolean (because the subject and the population basis are the same, and the population criteria define yes/no values for each individual in the population). For measures that have a population basis that is different than the subject, this element specifies the type of the population basis. For example, an encounter-based measure has a subject of Patient and a population basis of Encounter, and the population criteria all return lists of Encounters.
Comment
For a subject-based measure, the population basis is simply boolean; all the criteria are expressed as true/false conditions that determine membership of an individual case in the population. For non-subject-based measures, the population basis can be any resource type, and the criteria are queries that return the subject's contribution to the population as a list of that resource type. For example, for a procedure-based measure, the population criteria would return lists of procedures that should be included in each population.
Requirements
Allows non-subject-based measures to be specified. Note that because the binding is to all fhir types, it is possible to specify abstract types such as Resource or DomainResource as the basis for a measure. Authoring environments may wish to constrain this further, depending on content needs.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.date
Id
Measure.date
Type
Cardinality
0 - 1
Definition
The date (and optionally time) when the measure was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the measure changes.
Comment
The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the measure. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.publisher
Id
Measure.publisher
Type
Cardinality
0 - 1
Definition
The name of the organization or individual responsible for the release and ongoing maintenance of the measure.
Comment
Usually an organization but may be an individual. The publisher (or steward) of the measure is the organization or individual primarily responsible for the maintenance and upkeep of the measure. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the measure. This item SHOULD be populated unless the information is available from context.
Requirements
Helps establish the "authority/credibility" of the measure. May also allow for contact.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact
Id
Measure.contact
Type
Cardinality
0 - *
Definition
Contact details to assist a user in finding and communicating with the publisher.
Comment
May be a web site, an email address, a telephone number, etc.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Binding
Strength
required
Description
Telecommunications form for contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.contact.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.contact.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Binding
Strength
required
Description
Use of contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.
Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.contact.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.contact.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.description
Id
Measure.description
Type
Cardinality
0 - 1
Definition
A free text natural language description of the measure from a consumer's perspective.
Comment
This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the measure as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the measure is presumed to be the predominant language in the place the measure was created).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext
Id
Measure.useContext
Type
Cardinality
0 - *
Definition
The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate measure instances.
Comment
When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Requirements
Assist in searching for appropriate content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.code
Id
UsageContext.code
Type
Cardinality
1 - 1
Definition
A code that identifies the type of context being specified by this usage context.
Comment
Binding
Strength
extensible
Description
A code that specifies a type of context being specified by a usage context.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.code.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.code.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.code.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.useContext.UsageContext.code.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.useContext.UsageContext.code.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.value[x]
Id
UsageContext.value[x]
Type
Cardinality
1 - 1
Definition
A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.
Comment
Binding
Strength
example
Description
A code that defines the specific value for the context being specified.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.jurisdiction
Id
Measure.jurisdiction
Type
Cardinality
0 - *
Definition
A legal or geographic region in which the measure is intended to be used.
Comment
It may be possible for the measure to be used in jurisdictions other than those for which it was originally designed or intended.
DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)
Binding
Strength
extensible
Description
Countries and regions within which this artifact is targeted for use.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.jurisdiction.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.jurisdiction.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.jurisdiction.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.jurisdiction.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.jurisdiction.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.jurisdiction.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.purpose
Id
Measure.purpose
Type
Cardinality
0 - 1
Definition
Explanation of why this measure is needed and why it has been designed as it has.
Comment
This element does not describe the usage of the measure. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this measure.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.usage
Id
Measure.usage
Type
Cardinality
0 - 1
Definition
A detailed description, from a clinical perspective, of how the measure is used.
Comment
This metadata element was typically referred to as Guidance in HQMF
Requirements
Measure developers must be able to provide additional guidance for implementers to understand the intent with greater specificity than that provided in the population criteria of the measure. This element provides detailed guidance, where the usage element provides a summary of the guidance.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.copyright
Id
Measure.copyright
Type
Cardinality
0 - 1
Definition
A copyright statement relating to the measure and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the measure.
Comment
The short copyright declaration (e.g. (c) '2015+ xyz organization' should be sent in the copyrightLabel element.
Requirements
Consumers must be able to determine any legal restrictions on the use of the measure and/or its content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.copyrightLabel
Id
Measure.copyrightLabel
Type
Cardinality
0 - 1
Definition
A short string (<50 characters), suitable for inclusion in a page footer that identifies the copyright holder, effective period, and optionally whether rights are resctricted. (e.g. 'All rights reserved', 'Some rights reserved').
Comment
The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.
Requirements
Defines the content expected to be rendered in all representations of the artifact.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.approvalDate
Id
Measure.approvalDate
Type
Cardinality
0 - 1
Definition
The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.
Comment
The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.lastReviewDate
Id
Measure.lastReviewDate
Type
Cardinality
0 - 1
Definition
The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.
Comment
If specified, this date follows the original approval date.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Requirements
Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.effectivePeriod
Id
Measure.effectivePeriod
Type
Cardinality
0 - 1
Definition
The period during which the measure content was or is planned to be in active use.
Comment
The effective period for a measure determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Requirements
Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the measure are or are expected to be used instead.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.effectivePeriod.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.effectivePeriod.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.topic
Id
Measure.topic
Type
Cardinality
0 - *
Definition
Descriptive topics related to the content of the measure. Topics provide a high-level categorization grouping types of measures that can be useful for filtering and searching.
Comment
DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'topic' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#topic and useContext.valueCodeableConcept indicating the topic)
Requirements
Repositories must be able to determine how to categorize the measure so that it can be found by topical searches.
Binding
Strength
example
Description
High-level categorization of the definition, used for searching, sorting, and filtering.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.topic.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.topic.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.topic.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.topic.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.topic.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.topic.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author
Id
Measure.author
Type
Cardinality
0 - *
Definition
An individiual or organization primarily involved in the creation and maintenance of the content.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Binding
Strength
required
Description
Telecommunications form for contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.author.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.author.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Binding
Strength
required
Description
Use of contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.
Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.author.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.author.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.editor
Id
Measure.editor
Type
Cardinality
0 - *
Definition
An individual or organization primarily responsible for internal coherence of the content.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Binding
Strength
required
Description
Telecommunications form for contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.editor.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.editor.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Binding
Strength
required
Description
Use of contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.
Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.editor.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.editor.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.reviewer
Id
Measure.reviewer
Type
Cardinality
0 - *
Definition
An individual or organization asserted by the publisher to be primarily responsible for review of some aspect of the content.
Comment
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Binding
Strength
required
Description
Telecommunications form for contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Binding
Strength
required
Description
Use of contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.
Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.reviewer.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.endorser
Id
Measure.endorser
Type
Cardinality
0 - *
Definition
An individual or organization asserted by the publisher to be responsible for officially endorsing the content for use in some setting.
Comment
See guidance around (not) making local changes to elements [here](canonicalresource.html#localization).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Binding
Strength
required
Description
Telecommunications form for contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cpt-2
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Binding
Strength
required
Description
Use of contact point.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.
Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.endorser.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Measure.relatedArtifact
Id
Measure.relatedArtifact
Type
Cardinality
0 - *
Definition
Related artifacts such as additional documentation, justification, or bibliographic references.
Comment
Each related artifact is either an attachment, or a reference to another resource, but not both.
Requirements
Measures must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
type
documentation | justification | citation | predecessor | successor | derived-from | depends-on | composed-of | part-of | amends | amended-with | appends | appended-with | cites | cited-by | comments-on | comment-in | contains | contained-in | corrects | correction-in | replaces | replaced-with | retracts | retracted-by | signs | similar-to | supports | supported-with | transforms | transformed-into | transformed-with | documents | specification-of | created-with | cite-as
Path
Measure.relatedArtifact.RelatedArtifact.type
Id
RelatedArtifact.type
Type
Cardinality
1 - 1
Definition
The type of relationship to the related artifact.
Comment
The presence of both sides of a relationship type (e.g. successor and predecessor) is required to support use cases where one side of a relationship is not represented in FHIR. However, this feature SHALL NOT be used to create bi-directional resource links in FHIR instances. Specifically, following the methodology of "new points to old" and "many points to one", when using related artifact elements to describe and reference FHIR resources, the type element SHALL be drawn from the fhir-related-artifact-type ValueSet.
Binding
Strength
required
Description
The type of relationship to the related artifact.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.classifier
Id
RelatedArtifact.classifier
Type
Cardinality
0 - *
Definition
Provides additional classifiers of the related artifact.
Comment
Binding
Strength
example
Description
Additional classifiers for the related artifact.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.relatedArtifact.RelatedArtifact.classifier.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.label
Id
RelatedArtifact.label
Type
Cardinality
0 - 1
Definition
A short label that can be used to reference the citation from elsewhere in the containing artifact, such as a footnote index.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.display
Id
RelatedArtifact.display
Type
Cardinality
0 - 1
Definition
A brief description of the document or knowledge resource being referenced, suitable for display to a consumer.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.citation
Id
RelatedArtifact.citation
Type
Cardinality
0 - 1
Definition
A bibliographic citation for the related artifact. This text SHOULD be formatted according to an accepted citation format.
Comment
Additional structured information about citations should be captured as extensions.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document
Id
RelatedArtifact.document
Type
Cardinality
0 - 1
Definition
The document being referenced, represented as an attachment. This is exclusive with the resource element.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.contentType
Id
Attachment.contentType
Type
Cardinality
0 - 1
Definition
Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.
Comment
Requirements
Processors of the data need to be able to know how to interpret the data.
Binding
Strength
required
Description
BCP 13 (RFCs 2045, 2046, 2047, 4288, 4289 and 2049)
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
att-1
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.data
Id
Attachment.data
Type
Cardinality
0 - 1
Definition
The actual data of the attachment - a sequence of bytes, base64 encoded.
Comment
The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.
Requirements
The data needs to able to be transmitted inline.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
att-1
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.url
Id
Attachment.url
Type
Cardinality
0 - 1
Definition
A location where the data can be accessed.
Comment
If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.
Requirements
The data needs to be transmitted by reference.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.size
Id
Attachment.size
Type
Cardinality
0 - 1
Definition
The number of bytes of data that make up this attachment (before base64 encoding, if that is done).
Comment
The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.
Requirements
Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.hash
Id
Attachment.hash
Type
Cardinality
0 - 1
Definition
The calculated hash of the data using SHA-1. Represented using base64.
Comment
The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see [Provenance.signature](provenance-definitions.html#Provenance.signature) for mechanism to protect a resource with a digital signature.
Requirements
Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.title
Id
Attachment.title
Type
Cardinality
0 - 1
Definition
A label or set of text to display in place of the data.
Comment
May sometimes be derived from the source filename.
Requirements
Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.creation
Id
Attachment.creation
Type
Cardinality
0 - 1
Definition
The date that the attachment was first created.
Comment
Requirements
This is often tracked as an integrity issue for use of the attachment.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.height
Id
Attachment.height
Type
Cardinality
0 - 1
Definition
Height of the image in pixels (photo/video).
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.width
Id
Attachment.width
Type
Cardinality
0 - 1
Definition
Width of the image in pixels (photo/video).
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.frames
Id
Attachment.frames
Type
Cardinality
0 - 1
Definition
The number of frames in a photo. This is used with a multi-page fax, or an imaging acquisition context that takes multiple slices in a single image, or an animated gif. If there is more than one frame, this SHALL have a value in order to alert interface software that a multi-frame capable rendering widget is required.
Comment
if the number of frames is not supplied, the value may be unknown. Applications should not assume that there is only one frame unless it is explicitly stated.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.duration
Id
Attachment.duration
Type
Cardinality
0 - 1
Definition
The duration of the recording in seconds - for audio and video.
Comment
The duration might differ from occurrencePeriod if recording was paused.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.document.Attachment.pages
Id
Attachment.pages
Type
Cardinality
0 - 1
Definition
The number of pages when printed.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resource
Id
RelatedArtifact.resource
Type
Cardinality
0 - 1
Definition
The related artifact, such as a library, value set, profile, or other knowledge resource.
Comment
If the type is predecessor, this is a reference to the succeeding knowledge resource. If the type is successor, this is a reference to the prior knowledge resource.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference
Id
RelatedArtifact.resourceReference
Type
Cardinality
0 - 1
Definition
The related artifact, if the artifact is not a canonical resource, or a resource reference to a canonical resource.
Comment
If both resource and resourceReference are present, they SHOULD be consistent and reference the same resource. Although relatedArtifact is intended to support references to definitional resources, there are cases where non-definitional resources can be definitional (such as Location where the kind is mode). Related artifacts SHOULD be used to reference definitional resources, and profiles SHOULD be used to make that explicit for particular use cases.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.resourceReference.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.relatedArtifact.RelatedArtifact.publicationStatus
Id
RelatedArtifact.publicationStatus
Type
Cardinality
0 - 1
Definition
The publication status of the artifact being referred to.
Comment
Binding
Strength
required
Description
Publication status of an artifact being referred to.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.relatedArtifact.RelatedArtifact.publicationDate
Id
RelatedArtifact.publicationDate
Type
Cardinality
0 - 1
Definition
The date of publication of the artifact being referred to.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.library
Id
Measure.library
Type
Cardinality
0 - *
Definition
A reference to a Library resource containing the formal logic used by the measure.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.disclaimer
Id
Measure.disclaimer
Type
Cardinality
0 - 1
Definition
Notices and disclaimers regarding the use of the measure or related to intellectual property (such as code systems) referenced by the measure.
Comment
Requirements
Some organizations require that notices and disclosures be included when publishing measures that reference their intellecutal property.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoring
Id
Measure.scoring
Type
Cardinality
0 - 1
Definition
Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented.
Comment
Binding
Strength
extensible
Description
The scoring type of the measure.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoring.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoring.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoring.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoring.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.scoring.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.scoring.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoringUnit
Id
Measure.scoringUnit
Type
Cardinality
0 - 1
Definition
Defines the expected units of measure for the measure score. This element SHOULD be specified as a UCUM unit.
Comment
When this element is specified, implementations are expected to report measure scores in the specified units. Note that this may involve unit conversion if the expected units are different than the units of the resulting score calculation. In this case, unit conversions SHALL be performed according to the unit conversion semantics specified by UCUM.
Requirements
When the unit cannot be inferred directly from the calculation logic, this element allows the specification of the desired units of measure of the output.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoringUnit.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoringUnit.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoringUnit.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.scoringUnit.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.scoringUnit.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.scoringUnit.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.compositeScoring
Id
Measure.compositeScoring
Type
Cardinality
0 - 1
Definition
If this is a composite measure, the scoring method used to combine the component measures to determine the composite score.
Comment
Binding
Strength
extensible
Description
The composite scoring method of the measure.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.compositeScoring.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.compositeScoring.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.compositeScoring.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.compositeScoring.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.compositeScoring.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.compositeScoring.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.type
Id
Measure.type
Type
Cardinality
0 - *
Definition
Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.
Comment
Binding
Strength
extensible
Description
The type of measure (includes codes from 2.16.840.1.113883.1.11.20368).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.riskAdjustment
Id
Measure.riskAdjustment
Type
Cardinality
0 - 1
Definition
A description of the risk adjustment factors that may impact the resulting score for the measure and how they may be accounted for when computing and reporting measure results.
Comment
Describes the method of adjusting for clinical severity and conditions present at the start of care that can influence patient outcomes for making valid comparisons of outcome measures across providers. Indicates whether a measure is subject to the statistical process for reducing, removing, or clarifying the influences of confounding factors to allow for more useful comparisons.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.rateAggregation
Id
Measure.rateAggregation
Type
Cardinality
0 - 1
Definition
Describes how to combine the information calculated, based on logic in each of several populations, into one summarized result.
Comment
The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.rationale
Id
Measure.rationale
Type
Cardinality
0 - 1
Definition
Provides a succinct statement of the need for the measure. Usually includes statements pertaining to importance criterion: impact, gap in care, and evidence.
Comment
Requirements
Measure developers need to be able to provide a detailed description of the purpose of the measure. This element provides detailed rationale, where the purpose element provides a summary of the rationale.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.clinicalRecommendationStatement
Id
Measure.clinicalRecommendationStatement
Type
Cardinality
0 - 1
Definition
Provides a summary of relevant clinical guidelines or other clinical recommendations supporting the measure.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.improvementNotation
Id
Measure.improvementNotation
Type
Cardinality
0 - 1
Definition
Information on whether an increase or decrease in score is the preferred result (e.g., a higher score indicates better quality OR a lower score indicates better quality OR quality is within a range).
Comment
Requirements
Measure consumers and implementers must be able to determine how to interpret a measure score.
Binding
Strength
required
Description
Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.improvementNotation.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.improvementNotation.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.improvementNotation.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.improvementNotation.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.improvementNotation.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.improvementNotation.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term
Id
Measure.term
Type
Cardinality
0 - *
Definition
Provides a description of an individual term used within the measure.
Comment
Requirements
Measure developers must be able to provide precise definitions of terms used within measure descriptions and guidance to help communicate the intent of the measure.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.code
Id
Measure.term.code
Type
Cardinality
0 - 1
Definition
A codeable representation of the defined term.
Comment
Binding
Strength
example
Description
Codeable representations of measure definition terms.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.term.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.term.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.term.definition
Id
Measure.term.definition
Type
Cardinality
0 - 1
Definition
Provides a definition for the term as used within the measure.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.guidance
Id
Measure.guidance
Type
Cardinality
0 - 1
Definition
Additional guidance for the measure including how it can be used in a clinical context, and the intent of the measure.
Comment
NOTE: This element is deprecated in favor of the usage element
Requirements
Measure developers must be able to provide additional guidance for implementers to understand the intent with greater specificity than that provided in the population criteria of the measure. This element provides detailed guidance, where the usage element provides a summary of the guidance.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group
Id
Measure.group
Type
Cardinality
0 - *
Definition
A group of population criteria for the measure.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.linkId
Id
Measure.group.linkId
Type
Cardinality
0 - 1
Definition
An identifier that is unique within the Measure allowing linkage to the equivalent item in a MeasureReport resource.
Comment
This ''can'' be a meaningful identifier (e.g. a LOINC code) but is not intended to have any meaning. GUIDs or sequential numbers are appropriate here.
LinkIds can have whitespaces and slashes by design. Tooling should not rely on linkIds being valid XHTML element IDs, and should not directly embed them as such
Requirements
[MeasureReport](measurereport.html#) does not require omitted groups to be included.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
mea-2 [warning]
Link ids should be 255 characters or less
Path
Measure.group.code
Id
Measure.group.code
Type
Cardinality
0 - 1
Definition
Indicates a meaning for the group. This can be as simple as a unique identifier, or it can establish meaning in a broader context by drawing from a terminology, allowing groups to be correlated across measures.
Comment
Binding
Strength
example
Description
Example of measure groups.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.description
Id
Measure.group.description
Type
Cardinality
0 - 1
Definition
The human readable description of this population group.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.type
Id
Measure.group.type
Type
Cardinality
0 - *
Definition
Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.
Comment
When specified at the group level, defines the measure type for this specific group. If not specified, the measureType of the group is determined by the root type element
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
subject[x]
E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device
Path
Measure.group.subject[x]
Id
Measure.group.subject[x]
Type
Cardinality
0 - 1
Definition
The intended subjects for the measure. If this element is not provided, a Patient subject is assumed, but the subject of the measure can be anything.
Comment
The subject of the measure is critical in interpreting the criteria definitions, as the logic in the measures is evaluated with respect to a particular subject. This corresponds roughly to the notion of a Compartment in that it limits what content is available based on its relationship to the subject. In CQL, this corresponds to the context declaration.
Binding
Strength
extensible
Description
The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.subject[x].CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.subject[x].CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.subject[x].CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.subject[x].CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.subject[x].CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.subject[x].CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.basis
Id
Measure.group.basis
Type
Cardinality
0 - 1
Definition
The population basis specifies the type of elements in the population. For a subject-based measure, this is boolean (because the subject and the population basis are the same, and the population criteria define yes/no values for each individual in the population). For measures that have a population basis that is different than the subject, this element specifies the type of the population basis. For example, an encounter-based measure has a subject of Patient and a population basis of Encounter, and the population criteria all return lists of Encounters.
Comment
When specified at the group level, defines the population basis for this specific group. If not specified, the basis for the group is determined by the root basis element
Requirements
Allows non-subject-based measures to be specified
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoring
Id
Measure.group.scoring
Type
Cardinality
0 - 1
Definition
Indicates how the calculation is performed for the measure, including proportion, ratio, continuous-variable, and cohort. The value set is extensible, allowing additional measure scoring types to be represented.
Comment
When specified at the group level, defines the scoring for this specific group. If not specified, scoring for this group is determined by the root scoring element
Binding
Strength
extensible
Description
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoring.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoring.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoring.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoring.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.scoring.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.scoring.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoringUnit
Id
Measure.group.scoringUnit
Type
Cardinality
0 - 1
Definition
Defines the expected units of measure for the measure score. This element SHOULD be specified as a UCUM unit.
Comment
When specified at the group level, this defines the scoringUnit for this specific group. If not specified, the scoringUnit for this group is determined by the root scoringUnit element. As with the root element, when this element is specified, implementations are expected to report measure scores in the specified units. Note that this may involve unit conversion if the expected units are different than the units of the resulting score calculation. In this case, unit conversions SHALL be performed according to the unit conversion semantics specified by UCUM.
Requirements
When the unit cannot be inferred directly from the calculation logic, this element allows the specification of the desired units of measure of the output.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoringUnit.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoringUnit.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoringUnit.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.scoringUnit.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.scoringUnit.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.scoringUnit.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.rateAggregation
Id
Measure.group.rateAggregation
Type
Cardinality
0 - 1
Definition
Describes how to combine the information calculated, based on logic in each of several populations, into one summarized result.
Comment
The measure rate for an organization or clinician is based upon the entities’ aggregate data and summarizes the performance of the entity over a given time period (e.g., monthly, quarterly, yearly). The aggregated data are derived from the results of a specific measure algorithm and, if appropriate, the application of specific risk adjustment models. Can also be used to describe how to risk adjust the data based on supplemental data elements described in the eMeasure (e.g., pneumonia hospital measures antibiotic selection in the ICU versus non-ICU and then the roll-up of the two). This could be applied to aggregated cohort measure definitions (e.g., CDC's aggregate reporting for TB at the state level).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.improvementNotation
Id
Measure.group.improvementNotation
Type
Cardinality
0 - 1
Definition
Information on whether an increase or decrease in score is the preferred result (e.g., a higher score indicates better quality OR a lower score indicates better quality OR quality is within a range).
Comment
When specified at the group level, this element defines the improvementNotation for this specific group. If not specified, improvementNotation for this group is determined by the root improvementNotation element
Requirements
Measure consumers and implementers must be able to determine how to interpret a measure score.
Binding
Strength
required
Description
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.improvementNotation.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.improvementNotation.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.improvementNotation.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.improvementNotation.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.improvementNotation.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.group.improvementNotation.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.library
Id
Measure.group.library
Type
Cardinality
0 - *
Definition
A reference to a Library resource containing the formal logic used by the measure group.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population
Id
Measure.group.population
Type
Cardinality
0 - *
Definition
A population criteria for the measure.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.linkId
Id
Measure.group.population.linkId
Type
Cardinality
0 - 1
Definition
An identifier that is unique within the Measure allowing linkage to the equivalent population in a MeasureReport resource.
Comment
This ''can'' be a meaningful identifier (e.g. a LOINC code) but is not intended to have any meaning. GUIDs or sequential numbers are appropriate here.
LinkIds can have whitespaces and slashes by design. Tooling should not rely on linkIds being valid XHTML element IDs, and should not directly embed them as such
Requirements
[MeasureReport](measurereport.html#) does not require omitted populations to be included.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
mea-3 [warning]
Link ids should be 255 characters or less
code
initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Path
Measure.group.population.code
Id
Measure.group.population.code
Type
Cardinality
0 - 1
Definition
The type of population criteria.
Comment
Binding
Strength
extensible
Description
The type of population.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.description
Id
Measure.group.population.description
Type
Cardinality
0 - 1
Definition
The human readable description of this population criteria.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.criteria
Id
Measure.group.population.criteria
Type
Cardinality
0 - 1
Definition
An expression that specifies the criteria for the population, typically the name of an expression in a library.
Comment
In the case of a continuous-variable or ratio measure, this may be the name of a function that calculates the value of the individual observation for each patient or event in the population. For these types of measures, individual observations are reported as observation resources included in the evaluatedResources bundle for each patient. See the MeasureReport resource or the Quality Reporting topic for more information.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.criteria.Expression.description
Id
Expression.description
Type
Cardinality
0 - 1
Definition
A brief, natural language description of the condition that effectively communicates the intended semantics.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.criteria.Expression.name
Id
Expression.name
Type
Cardinality
0 - 1
Definition
A short name assigned to the expression to allow for multiple reuse of the expression in the context where it is defined.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-2
Path
Measure.group.population.criteria.Expression.expression
Id
Expression.expression
Type
Cardinality
0 - 1
Definition
An expression in the specified language that returns a value.
Comment
If Expression.expression and Expression.reference are both present, the Expression.expression might just be a name pointing something within the referenced content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1
Path
Measure.group.population.criteria.Expression.reference
Id
Expression.reference
Type
Cardinality
0 - 1
Definition
A URI that defines where the expression is found.
Comment
If both a reference and an expression is found, the reference SHALL point to the same expression.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1
Path
Measure.group.population.groupDefinition
Id
Measure.group.population.groupDefinition
Type
Cardinality
0 - 1
Definition
A Group resource that defines this population as a set of characteristics.
Comment
Note that this approach can only be used for measures where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group resource SHALL be a definitional (as opposed to an actual) group.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.groupDefinition.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Measure.group.population.groupDefinition.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.groupDefinition.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.group.population.groupDefinition.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.group.population.inputPopulationId
Id
Measure.group.population.inputPopulationId
Type
Cardinality
0 - 1
Definition
The id of a population element in this measure that provides the input for this population criteria. In most cases, the scoring structure of the measure implies specific relationships (e.g. the Numerator uses the Denominator as the source in a proportion scoring). In some cases, however, multiple possible choices exist and must be resolved explicitly. For example in a ratio measure with multiple initial populations, the denominator must specify which population should be used as the starting point.
Comment
Requirements
For ratio and continuous variable measures, the source populations must be specified explicitly when they cannot be unambiguously determined from the scoring structure.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
aggregateMethod
Aggregation method for a measure score (e.g. sum, average, median, minimum, maximum, count)
Path
Measure.group.population.aggregateMethod
Id
Measure.group.population.aggregateMethod
Type
Cardinality
0 - 1
Definition
Specifies which method should be used to aggregate measure observation values. For most scoring types, this is implied by scoring (e.g. a proportion measure counts members of the populations). For continuous variables, however, this information must be specified to ensure correct calculation.
Comment
Requirements
For continuous variable measures, specifications must be able to indicate the aggregation method to be used for tallying results from individual observations.
Binding
Strength
extensible
Description
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.population.aggregateMethod.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier
Id
Measure.group.stratifier
Type
Cardinality
0 - *
Definition
The stratifier criteria for the measure report, specified as either the name of a valid CQL expression defined within a referenced library or a valid FHIR Resource Path.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.stratifier.linkId
Id
Measure.group.stratifier.linkId
Type
Cardinality
0 - 1
Definition
An identifier that is unique within the Measure allowing linkage to the equivalent item in a MeasureReport resource.
Comment
This ''can'' be a meaningful identifier (e.g. a LOINC code) but is not intended to have any meaning. GUIDs or sequential numbers are appropriate here.
LinkIds can have whitespaces and slashes by design. Tooling should not rely on linkIds being valid XHTML element IDs, and should not directly embed them as such
Requirements
[MeasureReport](measurereport.html#) does not require omitted stratifiers to be included.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
mea-4 [warning]
Link ids should be 255 characters or less
Path
Measure.group.stratifier.code
Id
Measure.group.stratifier.code
Type
Cardinality
0 - 1
Definition
Indicates a meaning for the stratifier. This can be as simple as a unique identifier, or it can establish meaning in a broader context by drawing from a terminology, allowing stratifiers to be correlated across measures.
Comment
Binding
Strength
example
Description
Meaning of the stratifier.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.stratifier.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.description
Id
Measure.group.stratifier.description
Type
Cardinality
0 - 1
Definition
The human readable description of this stratifier criteria.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.stratifier.criteria
Id
Measure.group.stratifier.criteria
Type
Cardinality
0 - 1
Definition
An expression that specifies the criteria for the stratifier. This is typically the name of an expression defined within a referenced library, but it may also be a path to a stratifier element.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.stratifier.criteria.Expression.description
Id
Expression.description
Type
Cardinality
0 - 1
Definition
A brief, natural language description of the condition that effectively communicates the intended semantics.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.criteria.Expression.name
Id
Expression.name
Type
Cardinality
0 - 1
Definition
A short name assigned to the expression to allow for multiple reuse of the expression in the context where it is defined.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-2
Path
Measure.group.stratifier.criteria.Expression.expression
Id
Expression.expression
Type
Cardinality
0 - 1
Definition
An expression in the specified language that returns a value.
Comment
If Expression.expression and Expression.reference are both present, the Expression.expression might just be a name pointing something within the referenced content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1
Path
Measure.group.stratifier.criteria.Expression.reference
Id
Expression.reference
Type
Cardinality
0 - 1
Definition
A URI that defines where the expression is found.
Comment
If both a reference and an expression is found, the reference SHALL point to the same expression.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1
Path
Measure.group.stratifier.groupDefinition
Id
Measure.group.stratifier.groupDefinition
Type
Cardinality
0 - 1
Definition
A Group resource that defines this population as a set of characteristics.
Comment
Note that this approach can only be used for measures where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be a definitional (as opposed to an actual) group.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.groupDefinition.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Measure.group.stratifier.groupDefinition.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.groupDefinition.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.group.stratifier.groupDefinition.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Measure.group.stratifier.component
Id
Measure.group.stratifier.component
Type
Cardinality
0 - *
Definition
A component of the stratifier criteria for the measure report, specified as either the name of a valid CQL expression defined within a referenced library or a valid FHIR Resource Path.
Comment
Stratifiers are defined either as a single criteria, or as a set of component criteria.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
mea-1
Path
Measure.group.stratifier.component.linkId
Id
Measure.group.stratifier.component.linkId
Type
Cardinality
0 - 1
Definition
An identifier that is unique within the Measure allowing linkage to the equivalent item in a MeasureReport resource.
Comment
This ''can'' be a meaningful identifier (e.g. a LOINC code) but is not intended to have any meaning. GUIDs or sequential numbers are appropriate here.
LinkIds can have whitespaces and slashes by design. Tooling should not rely on linkIds being valid XHTML element IDs, and should not directly embed them as such
Requirements
[MeasureReport](measurereport.html#) does not require omitted stratifier components to be included.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
mea-5 [warning]
Link ids should be 255 characters or less
Path
Measure.group.stratifier.component.code
Id
Measure.group.stratifier.component.code
Type
Cardinality
0 - 1
Definition
Indicates a meaning for the stratifier component. This can be as simple as a unique identifier, or it can establish meaning in a broader context by drawing from a terminology, allowing stratifiers to be correlated across measures.
Comment
Binding
Strength
example
Description
Meaning of the stratifier.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.component.description
Id
Measure.group.stratifier.component.description
Type
Cardinality
0 - 1
Definition
The human readable description of this stratifier criteria component.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.component.criteria
Id
Measure.group.stratifier.component.criteria
Type
Cardinality
0 - 1
Definition
An expression that specifies the criteria for this component of the stratifier. This is typically the name of an expression defined within a referenced library, but it may also be a path to a stratifier element.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.group.stratifier.component.groupDefinition
Id
Measure.group.stratifier.component.groupDefinition
Type
Cardinality
0 - 1
Definition
A Group resource that defines this population as a set of characteristics.
Comment
Note that this approach can only be used for measures where the basis is of the same type as the populations (e.g. a Patient-based measure, rather than an Encounter-based measure). In addition, the referenced Group SHALL be a definitional (as opposed to an actual) group.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData
Id
Measure.supplementalData
Type
Cardinality
0 - *
Definition
The supplemental data criteria for the measure report, specified as either the name of a valid CQL expression within a referenced library, or a valid FHIR Resource Path.
Comment
Note that supplemental data are reported as resources for each patient and referenced in the supplementalData element of the MeasureReport. If the supplementalData expression results in a value other than a resource, it is reported using an Observation resource, typically contained in the resulting MeasureReport. See the MeasureReport resource and the Quality Reporting topic for more information.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.linkId
Id
Measure.supplementalData.linkId
Type
Cardinality
0 - 1
Definition
An identifier that is unique within the Measure allowing linkage to the equivalent item in a MeasureReport resource.
Comment
This ''can'' be a meaningful identifier (e.g. a LOINC code) but is not intended to have any meaning. GUIDs or sequential numbers are appropriate here.
LinkIds can have whitespaces and slashes by design. Tooling should not rely on linkIds being valid XHTML element IDs, and should not directly embed them as such
Requirements
[MeasureReport](measurereport.html#) does not require omitted supplementalData to be included.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
mea-6 [warning]
Link ids should be 255 characters or less
Path
Measure.supplementalData.code
Id
Measure.supplementalData.code
Type
Cardinality
0 - 1
Definition
Indicates a meaning for the supplemental data. This can be as simple as a unique identifier, or it can establish meaning in a broader context by drawing from a terminology, allowing supplemental data to be correlated across measures.
Comment
Binding
Strength
example
Description
Meaning of the supplemental data.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.supplementalData.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.supplementalData.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.usage
Id
Measure.supplementalData.usage
Type
Cardinality
0 - *
Definition
An indicator of the intended usage for the supplemental data element. Supplemental data indicates the data is additional information requested to augment the measure information. Risk adjustment factor indicates the data is additional information used to calculate risk adjustment factors when applying a risk model to the measure calculation.
Comment
Binding
Strength
extensible
Description
The intended usage for supplemental data elements in the measure.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.usage.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.usage.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.usage.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.usage.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.supplementalData.usage.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Measure.supplementalData.usage.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.description
Id
Measure.supplementalData.description
Type
Cardinality
0 - 1
Definition
The human readable description of this supplemental data.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.criteria
Id
Measure.supplementalData.criteria
Type
Cardinality
1 - 1
Definition
The criteria for the supplemental data. This is typically the name of a valid expression defined within a referenced library, but it may also be a path to a specific data element. The criteria defines the data to be returned for this element.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.criteria.Expression.description
Id
Expression.description
Type
Cardinality
0 - 1
Definition
A brief, natural language description of the condition that effectively communicates the intended semantics.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Measure.supplementalData.criteria.Expression.name
Id
Expression.name
Type
Cardinality
0 - 1
Definition
A short name assigned to the expression to allow for multiple reuse of the expression in the context where it is defined.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-2
Path
Measure.supplementalData.criteria.Expression.expression
Id
Expression.expression
Type
Cardinality
0 - 1
Definition
An expression in the specified language that returns a value.
Comment
If Expression.expression and Expression.reference are both present, the Expression.expression might just be a name pointing something within the referenced content.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1
Path
Measure.supplementalData.criteria.Expression.reference
Id
Expression.reference
Type
Cardinality
0 - 1
Definition
A URI that defines where the expression is found.
Comment
If both a reference and an expression is found, the reference SHALL point to the same expression.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
exp-1