Summary
Request & Response
Diagnostics
Care Provision
Medications
Workflow
Entities
Management
Individuals
General
Billing
Support
Payment
Security
Other
Conformance
Terminology
Documents
Definitional Artifacts
Medication Definition
Evidence-Based Medicine
Quality Reporting & Testing
Public Health & Research
Complex
Primitive
ActivityDefinition
CanonicalResource
CapabilityStatement
ChargeItemDefinition
Claim
CodeSystem
Composition
ConceptMap
CoverageEligibilityRequest
DocumentReference
Encounter
EpisodeOfCare
Group
Library
List
Measure
MedicinalProductDefinition
MessageHeader
NamingSystem
Observation
Patient
PlanDefinition
Resource
SpecimenDefinition
StructureDefinition
StructureMap
Subscription
ValueSet
default
Represents a defined collection of entities that may be discussed or acted upon collectively but which are not expected to act collectively, and are not formally or legally recognized; i.e. a collection of entities that isn't an Organization.
Group
Path
Group
Id
Group
Cardinality
0 - *
Definition
Represents a defined collection of entities that may be discussed or acted upon collectively but which are not expected to act collectively, and are not formally or legally recognized; i.e. a collection of entities that isn't an Organization.
Comment
If both Group.characteristic and Group.member are present, then the members are the individuals who were found who met the characteristic. It's possible that there might be other candidate members who meet the characteristic and aren't (yet) in the list. All members SHALL have the listed characteristics.
Constraint
dom-2 [error]
If the resource is contained in another resource, it SHALL NOT contain nested Resources
dom-3 [error]
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
dom-4 [error]
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
dom-5 [error]
If a resource is contained in another resource, it SHALL NOT have a security label
dom-6 [warning]
A resource should have narrative for robust management
Path
Group.identifier
Id
Group.identifier
Type
Cardinality
0 - *
Definition
Business identifiers assigned to this participant by one of the applications involved. These identifiers remain constant as the resource is updated and propagates from server to server.
Comment
Note: This is a business identifier, not a resource identifier (see [discussion](resource.html#identifiers)). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types.
Requirements
Allows identification of the group as it is known by various participating systems and in a way that remains consistent across servers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Group.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Group.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.active
Id
Group.active
Type
Cardinality
0 - 1
Definition
Indicates whether the record for the group is available for use or is merely being retained for historical purposes.
Comment
Requirements
Need to be able to mark a group record as not to be used because it was created in error or is otherwise no longer available (e.g. a herd that no longer exists).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
type
person | animal | practitioner | device | careteam | healthcareservice | location | organization | relatedperson | specimen
Path
Group.type
Id
Group.type
Type
Cardinality
1 - 1
Definition
Identifies the broad classification of the kind of resources the group includes.
Comment
Group members SHALL be of the appropriate resource type (Patient for person or animal; or Practitioner, PractitionerRole, Device, CareTeam, HealthcareService, Location, Organization, RelatedPerson, or Specimen for the other types.), or a Group of the resources of the appropriate type.
Requirements
Identifies what type of resources the group is made up of.
Binding
Strength
required
Description
Types of resources that are part of group.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.membership
Id
Group.membership
Type
Cardinality
1 - 1
Definition
Basis for membership in the Group:
* 'definitional': The Group.characteristics specified are both necessary and sufficient to determine membership. All entities that meet the criteria are considered to be members of the group, whether referenced by the group or not. If members are present, they are individuals that happen to be known as meeting the Group.characteristics. The list cannot be presumed to be complete.
* 'enumerated': The Group.characteristics are necessary but not sufficient to determine membership. Membership is determined by being listed as one of the Group.member.
Comment
Requirements
There are use-cases for groups that define specific collections of individuals, and other groups that define "types" of intended individuals. The requirements for both kinds of groups are similar, so we use a single resource, distinguished by this element.
Binding
Strength
required
Description
The basis for membership in a group
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.code
Id
Group.code
Type
Cardinality
0 - 1
Definition
Provides a specific type of resource the group includes; e.g. "cow", "syringe", etc.
Comment
This would generally be omitted for Person resources.
Binding
Strength
example
Description
Kind of particular resource; e.g. cow, syringe, lake, etc.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.name
Id
Group.name
Type
Cardinality
0 - 1
Definition
A label assigned to the group for human identification and communication.
Comment
Requirements
Used to identify the group in human communication.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.description
Id
Group.description
Type
Cardinality
0 - 1
Definition
Explanation of what the group represents and how it is intended to be used.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.quantity
Id
Group.quantity
Type
Cardinality
0 - 1
Definition
A count of the number of resource instances that are part of the group.
Comment
Note that the quantity may be less than the number of members if some of the members are not active.
Requirements
Group size is a common defining characteristic.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity
Id
Group.managingEntity
Type
Cardinality
0 - 1
Definition
Entity responsible for defining and maintaining Group characteristics and/or registered members.
Comment
This does not strictly align with ownership of a herd or flock, but may suffice to represent that relationship in simple cases. More complex cases will require an extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Group.managingEntity.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.managingEntity.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Group.managingEntity.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.managingEntity.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.managingEntity.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Group.managingEntity.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.managingEntity.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.managingEntity.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.managingEntity.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.characteristic
Id
Group.characteristic
Type
Cardinality
0 - *
Definition
Identifies traits whose presence r absence is shared by members of the group.
Comment
All the identified characteristics must be true for an entity to a member of the group.
Requirements
Needs to be a generic mechanism for identifying what individuals can be part of a group.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.code
Id
Group.characteristic.code
Type
Cardinality
1 - 1
Definition
A code that identifies the kind of trait being asserted.
Comment
Requirements
Need a formal way of identifying the characteristic being described.
Binding
Strength
example
Description
List of characteristics used to describe group members; e.g. gender, age, owner, location, etc.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.characteristic.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.characteristic.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.value[x]
Id
Group.characteristic.value[x]
Type
Cardinality
1 - 1
Definition
The value of the trait that holds (or does not hold - see 'exclude') for members of the group.
Comment
For Range, it means members of the group have a value that falls somewhere within the specified range.
Requirements
The value of the characteristic is what determines group membership.
Binding
Strength
example
Description
Value of descriptive member characteristic; e.g. red, male, pneumonia, Caucasian, etc.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.value[x].CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.value[x].CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.value[x].CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.value[x].CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.characteristic.value[x].CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
cod-1
Path
Group.characteristic.value[x].CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.exclude
Id
Group.characteristic.exclude
Type
Cardinality
1 - 1
Definition
If true, indicates the characteristic is one that is NOT held by members of the group.
Comment
This is labeled as "Is Modifier" because applications cannot wrongly include excluded members as included or vice versa.
Requirements
Sometimes group membership is determined by characteristics not possessed.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.period
Id
Group.characteristic.period
Type
Cardinality
0 - 1
Definition
The period over which the characteristic is tested; e.g. the patient had an operation during the month of June.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.characteristic.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.characteristic.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.member
Id
Group.member
Type
Cardinality
0 - *
Definition
Identifies the resource instances that are members of the group.
Comment
Requirements
Often the only thing of interest about a group is "who's in it".
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity
Id
Group.member.entity
Type
Cardinality
1 - 1
Definition
A reference to the entity that is a member of the group. Must be consistent with Group.type. If the entity is another group, then the type must be the same.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
ref-1
Path
Group.member.entity.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a known RESTful URL) or by resolving the target of the reference.
Binding
Strength
extensible
Description
Aa resource (or, for logical models, the URI of the logical model).
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
This element only allows for a single identifier. In the case where additional identifers are required, use the [http://hl7.org/fhir/StructureDefinition/additionalIdentifier](http://hl7.org/fhir/extensions/StructureDefinition-additionalIdentifier.html) extension.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.member.entity.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Binding
Strength
required
Description
Identifies the purpose for this identifier, if known .
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Binding
Strength
extensible
Description
A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [http://hl7.org/fhir/StructureDefinition/rendered-value](http://hl7.org/fhir/extensions/StructureDefinition-rendered-value.html)). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ident-1
Path
Group.member.entity.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.entity.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-2
Path
Group.member.period
Id
Group.member.period
Type
Cardinality
0 - 1
Definition
The period that the member was in the group, if known.
Comment
Requirements
Need to track who was in a group at a particular time.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Group.member.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.member.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The end value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
Group.member.inactive
Id
Group.member.inactive
Type
Cardinality
0 - 1
Definition
A flag to indicate that the member is no longer in the group, but previously may have been a member.
Comment
Requirements
Sometimes you don't know when someone stopped being in a group, but not when.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children