Complex
Primitive
ActivityDefinition
CapabilityStatement
CodeSystem
Composition
ConceptMap
Encounter
Library
List
Measure
MessageHeader
Observation
Patient
PlanDefinition
Questionnaire
Resource
ServiceDefinition
StructureDefinition
StructureMap
ValueSet
default
Base StructureDefinition for Library Resource
Library
Path
Library
Id
Library
Cardinality
0 - *
Definition
The Library resource is a general-purpose container for knowledge asset definitions. It can be used to describe and expose existing knowledge assets such as logic libraries and information model descriptions, as well as to describe a collection of knowledge assets.
Comment
Constraint
dom-2 [error]
If the resource is contained in another resource, it SHALL NOT contain nested Resources
dom-1 [error]
If the resource is contained in another resource, it SHALL NOT contain any narrative
dom-4 [error]
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
dom-3 [error]
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource
Path
Library.url
Id
Library.url
Type
Cardinality
0 - 1
Definition
An absolute URI that is used to identify this library when it is referenced in a specification, model, design or an instance. This SHALL be a URL, SHOULD be globally unique, and SHOULD be an address at which this library is (or will be) published. The URL SHOULD include the major version of the library. For more information see [Technical and Business Versions](resource.html#versions).
Comment
Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. Multiple instances may share the same url if they have a distinct version.
Requirements
Allows the library to be referenced by a single globally unique identifier.
Path
Library.identifier
Id
Library.identifier
Type
Cardinality
0 - *
Definition
A formal identifier that is used to identify this library when it is represented in other formats, or referenced in a specification, model, design or an instance. e.g. CMS or NQF identifiers for a measure artifact. Note that at least one identifier is required for non-experimental active artifacts.
Comment
Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, e.g., to identify this library outside of FHIR, where it is not possible to use the logical URI.
Requirements
Allows externally provided and/or usable business identifiers to be easily associated with the module.
Path
Library.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
Library.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
Library.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
Library.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
Library.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
Library.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
Library.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
Library.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
Library.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
Library.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
Library.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
Library.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
Library.version
Id
Library.version
Type
Cardinality
0 - 1
Definition
The identifier that is used to identify this version of the library when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the library author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts.
Comment
There may be different library instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a refrence to a particular business version of the library with the format [url]|[version].
Path
Library.name
Id
Library.name
Type
Cardinality
0 - 1
Definition
A natural language name identifying the library. This name should be usable as an identifier for the module by machine processing applications such as code generation.
Comment
The name is not expected to be globally unique. The name should be a simple alpha-numeric type name to ensure that it is computable friendly.
Requirements
Support human navigation and code generation.
Path
Library.title
Id
Library.title
Type
Cardinality
0 - 1
Definition
A short, descriptive, user-friendly title for the library.
Comment
This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Path
Library.status
Id
Library.status
Type
Cardinality
1 - 1
Definition
The status of this library. Enables tracking the life-cycle of the content.
Comment
Allows filtering of librarys that are appropriate for use vs. not.
This is labeled as "Is Modifier" because applications should not use a retired library without due consideration.
Path
Library.experimental
Id
Library.experimental
Type
Cardinality
0 - 1
Definition
A boolean value to indicate that this library is authored for testing purposes (or education/evaluation/marketing), and is not intended to be used for genuine usage.
Comment
Allows filtering of library that are appropriate for use vs. not. This is labeled as "Is Modifier" because applications should not use an experimental library in production.
Requirements
Enables experimental content to be developed following the same lifecycle that would be used for a production-level library.
Path
Library.type
Id
Library.type
Type
Cardinality
1 - 1
Definition
Identifies the type of library such as a Logic Library, Model Definition, Asset Collection, or Module Definition.
Comment
Path
Library.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.date
Id
Library.date
Type
Cardinality
0 - 1
Definition
The date (and optionally time) when the library was published. The date must change if and when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the library changes.
Comment
Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the library. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Path
Library.publisher
Id
Library.publisher
Type
Cardinality
0 - 1
Definition
The name of the individual or organization that published the library.
Comment
Usually an organization, but may be an individual. The publisher (or steward) of the library is the organization or individual primarily responsible for the maintenance and upkeep of the library. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the library. This item SHOULD be populated unless the information is available from context.
Requirements
Helps establish the "authority/credibility" of the library. May also allow for contact.
Path
Library.description
Id
Library.description
Type
Cardinality
0 - 1
Definition
A free text natural language description of the library from a consumer's perspective.
Comment
This description can be used to capture details such as why the library was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the library as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the profile is presumed to be the predominant language in the place the profile was created).
Path
Library.purpose
Id
Library.purpose
Type
Cardinality
0 - 1
Definition
Explaination of why this library is needed and why it has been designed as it has.
Comment
This element does not describe the usage of the library Instead it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this library.
Path
Library.usage
Id
Library.usage
Type
Cardinality
0 - 1
Definition
A detailed description of how the library is used from a clinical perspective.
Comment
Path
Library.approvalDate
Id
Library.approvalDate
Type
Cardinality
0 - 1
Definition
The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.
Comment
The 'date' element may be more recent than the approval date because of minor changes / editorial corrections.
Path
Library.lastReviewDate
Id
Library.lastReviewDate
Type
Cardinality
0 - 1
Definition
The date on which the resource content was last reviewed. Review happens periodically after approval, but doesn't change the original approval date.
Comment
If specified, this is usually after the approval date.
Requirements
Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.
Path
Library.effectivePeriod
Id
Library.effectivePeriod
Type
Cardinality
0 - 1
Definition
The period during which the library content was or is planned to be in active use.
Comment
The effective period for a library determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.
Requirements
Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of a the library are or are expected to be used instead.
Path
Library.effectivePeriod.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
Library.effectivePeriod.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
Library.useContext
Id
Library.useContext
Type
Cardinality
0 - *
Definition
The content was developed with a focus and intent of supporting the contexts that are listed. These terms may be used to assist with indexing and searching for appropriate library instances.
Comment
When multiple useContexts are specified, there is no expectation whether all or any of the contexts apply.
Requirements
Assist in searching for appropriate content.
Path
Library.useContext.UsageContext.code
Id
UsageContext.code
Type
Cardinality
1 - 1
Definition
A code that identifies the type of context being specified by this usage context.
Comment
Path
Library.useContext.UsageContext.code.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.useContext.UsageContext.code.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.useContext.UsageContext.code.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.useContext.UsageContext.code.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.useContext.UsageContext.code.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.useContext.UsageContext.value[x]
Id
UsageContext.value[x]
Type
Cardinality
1 - 1
Definition
A value that defines the context specified in this context of use. The interpretation of the value is defined by the code.
Comment
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.useContext.UsageContext.value[x].CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.jurisdiction
Id
Library.jurisdiction
Type
Cardinality
0 - *
Definition
A legal or geographic region in which the library is intended to be used.
Comment
It may be possible for the library to be used in jurisdictions other than those for which it was originally designed or intended.
Path
Library.jurisdiction.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.jurisdiction.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.jurisdiction.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.jurisdiction.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.jurisdiction.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.jurisdiction.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.topic
Id
Library.topic
Type
Cardinality
0 - *
Definition
Descriptive topics related to the content of the library. Topics provide a high-level categorization of the library that can be useful for filtering and searching.
Comment
Requirements
Repositories must be able to determine how to categorize the library so that it can be found by topical searches.
Path
Library.topic.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.topic.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.topic.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.topic.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.topic.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.topic.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.contributor
Id
Library.contributor
Type
Cardinality
0 - *
Definition
A contributor to the content of the library, including authors, editors, reviewers, and endorsers.
Comment
Requirements
Consumers of the content must be able to quickly determine who contributed to the content of the library.
Path
Library.contributor.Contributor.type
Id
Contributor.type
Type
Cardinality
1 - 1
Definition
The type of contributor.
Comment
Path
Library.contributor.Contributor.name
Id
Contributor.name
Type
Cardinality
1 - 1
Definition
The name of the individual or organization responsible for the contribution.
Comment
Path
Library.contributor.Contributor.contact
Id
Contributor.contact
Type
Cardinality
0 - *
Definition
Contact details to assist a user in finding and communicating with the contributor.
Comment
Path
Library.contributor.Contributor.contact.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Path
Library.contributor.Contributor.contact.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Path
Library.contributor.Contributor.contact.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Condition
cpt-2
Path
Library.contributor.Contributor.contact.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Path
Library.contributor.Contributor.contact.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one. Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Path
Library.contributor.Contributor.contact.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. Contacts are ranked with lower values coming before higher values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Path
Library.contributor.Contributor.contact.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Path
Library.contact
Id
Library.contact
Type
Cardinality
0 - *
Definition
Contact details to assist a user in finding and communicating with the publisher.
Comment
May be a web site, an email address, a telephone number, etc.
Path
Library.contact.ContactDetail.name
Id
ContactDetail.name
Type
Cardinality
0 - 1
Definition
The name of an individual to contact.
Comment
If there is no named individual, the telecom information is for the organization as a whole.
Path
Library.contact.ContactDetail.telecom
Id
ContactDetail.telecom
Type
Cardinality
0 - *
Definition
The contact details for the individual (if a name was provided) or the organization.
Comment
Path
Library.contact.ContactDetail.telecom.ContactPoint.system
Id
ContactPoint.system
Type
Cardinality
0 - 1
Definition
Telecommunications form for contact point - what communications system is required to make use of the contact.
Comment
Condition
cpt-2
Path
Library.contact.ContactDetail.telecom.ContactPoint.value
Id
ContactPoint.value
Type
Cardinality
0 - 1
Definition
The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Comment
Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Requirements
Need to support legacy numbers that are not in a tightly controlled format.
Path
Library.contact.ContactDetail.telecom.ContactPoint.use
Id
ContactPoint.use
Type
Cardinality
0 - 1
Definition
Identifies the purpose for the contact point.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one. Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Requirements
Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Path
Library.contact.ContactDetail.telecom.ContactPoint.rank
Id
ContactPoint.rank
Type
Cardinality
0 - 1
Definition
Specifies a preferred order in which to use a set of contacts. Contacts are ranked with lower values coming before higher values.
Comment
Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Path
Library.contact.ContactDetail.telecom.ContactPoint.period
Id
ContactPoint.period
Type
Cardinality
0 - 1
Definition
Time period when the contact point was/is in use.
Comment
Path
Library.contact.ContactDetail.telecom.ContactPoint.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Condition
per-1
Path
Library.contact.ContactDetail.telecom.ContactPoint.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
Condition
per-1
Path
Library.copyright
Id
Library.copyright
Type
Cardinality
0 - 1
Definition
A copyright statement relating to the library and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the library.
Comment
Requirements
Consumers must be able to determine any legal restrictions on the use of the library and/or its content.
Path
Library.relatedArtifact
Id
Library.relatedArtifact
Type
Cardinality
0 - *
Definition
Related artifacts such as additional documentation, justification, or bibliographic references.
Comment
Each related artifact is either an attachment, or a reference to another resource, but not both.
Requirements
Libraries must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.
type
documentation | justification | citation | predecessor | successor | derived-from | depends-on | composed-of
Path
Library.relatedArtifact.RelatedArtifact.type
Id
RelatedArtifact.type
Type
Cardinality
1 - 1
Definition
The type of relationship to the related artifact.
Comment
Path
Library.relatedArtifact.RelatedArtifact.display
Id
RelatedArtifact.display
Type
Cardinality
0 - 1
Definition
A brief description of the document or knowledge resource being referenced, suitable for display to a consumer.
Comment
Path
Library.relatedArtifact.RelatedArtifact.citation
Id
RelatedArtifact.citation
Type
Cardinality
0 - 1
Definition
A bibliographic citation for the related artifact. This text SHOULD be formatted according to an accepted citation format.
Comment
Additional structured information about citations should be captured as extensions.
Path
Library.relatedArtifact.RelatedArtifact.url
Id
RelatedArtifact.url
Type
Cardinality
0 - 1
Definition
A url for the artifact that can be followed to access the actual content.
Comment
If a document or resource element is present, this element SHALL NOT be provided (use the url or reference in the Attachment or resource reference).
Path
Library.relatedArtifact.RelatedArtifact.document
Id
RelatedArtifact.document
Type
Cardinality
0 - 1
Definition
The document being referenced, represented as an attachment. This is exclusive with the resource element.
Comment
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.contentType
Id
Attachment.contentType
Type
Cardinality
0 - 1
Definition
Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.
Comment
Requirements
Processors of the data need to be able to know how to interpret the data.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.data
Id
Attachment.data
Type
Cardinality
0 - 1
Definition
The actual data of the attachment - a sequence of bytes. In XML, represented using base64.
Comment
The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.
Requirements
The data needs to able to be transmitted inline.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.url
Id
Attachment.url
Type
Cardinality
0 - 1
Definition
An alternative location where the data can be accessed.
Comment
If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.
Requirements
The data needs to be transmitted by reference.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.size
Id
Attachment.size
Type
Cardinality
0 - 1
Definition
The number of bytes of data that make up this attachment (before base64 encoding, if that is done).
Comment
The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.
Requirements
Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.hash
Id
Attachment.hash
Type
Cardinality
0 - 1
Definition
The calculated hash of the data using SHA-1. Represented using base64.
Comment
The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded.
Requirements
Included so that applications can verify that the contents of a location have not changed and so that a signature of the content can implicitly sign the content of an image without having to include the data in the instance or reference the url in the signature.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.title
Id
Attachment.title
Type
Cardinality
0 - 1
Definition
A label or set of text to display in place of the data.
Comment
Requirements
Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.
Path
Library.relatedArtifact.RelatedArtifact.document.Attachment.creation
Id
Attachment.creation
Type
Cardinality
0 - 1
Definition
The date that the attachment was first created.
Comment
Requirements
This is often tracked as an integrity issue for use of the attachment.
Path
Library.relatedArtifact.RelatedArtifact.resource
Id
RelatedArtifact.resource
Type
Cardinality
0 - 1
Definition
The related resource, such as a library, value set, profile, or other knowledge resource.
Comment
If the type is predecessor, this is a reference to the succeeding knowledge resource. If the type is successor, this is a reference to the prior knowledge resource.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
Library.relatedArtifact.RelatedArtifact.resource.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
Library.parameter
Id
Library.parameter
Type
Cardinality
0 - *
Definition
The parameter element defines parameters used by the library.
Comment
Path
Library.parameter.ParameterDefinition.name
Id
ParameterDefinition.name
Type
Cardinality
0 - 1
Definition
The name of the parameter used to allow access to the value of the parameter in evaluation contexts.
Comment
Path
Library.parameter.ParameterDefinition.use
Id
ParameterDefinition.use
Type
Cardinality
1 - 1
Definition
Whether the parameter is input or output for the module.
Comment
Path
Library.parameter.ParameterDefinition.min
Id
ParameterDefinition.min
Type
Cardinality
0 - 1
Definition
The minimum number of times this parameter SHALL appear in the request or response.
Comment
Path
Library.parameter.ParameterDefinition.max
Id
ParameterDefinition.max
Type
Cardinality
0 - 1
Definition
The maximum number of times this element is permitted to appear in the request or response.
Comment
Path
Library.parameter.ParameterDefinition.documentation
Id
ParameterDefinition.documentation
Type
Cardinality
0 - 1
Definition
A brief discussion of what the parameter is for and how it is used by the module.
Comment
Path
Library.parameter.ParameterDefinition.type
Id
ParameterDefinition.type
Type
Cardinality
1 - 1
Definition
The type of the parameter.
Comment
Path
Library.parameter.ParameterDefinition.profile
Id
ParameterDefinition.profile
Type
Cardinality
0 - 1
Definition
If specified, this indicates a profile that the input data must conform to, or that the output data will conform to.
Comment
Path
Library.parameter.ParameterDefinition.profile.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Condition
ref-1
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.
Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html).
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Path
Library.parameter.ParameterDefinition.profile.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Path
Library.parameter.ParameterDefinition.profile.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Path
Library.dataRequirement
Id
Library.dataRequirement
Type
Cardinality
0 - *
Definition
Describes a set of data that must be provided in order to be able to successfully perform the computations defined by the library.
Comment
Path
Library.dataRequirement.DataRequirement.type
Id
DataRequirement.type
Type
Cardinality
1 - 1
Definition
The type of the required data, specified as the type name of a resource. For profiles, this value is set to the type of the base resource of the profile.
Comment
Path
Library.dataRequirement.DataRequirement.profile
Id
DataRequirement.profile
Type
Cardinality
0 - *
Definition
The profile of the required data, specified as the uri of the profile definition.
Comment
mustSupport
Indicates that specific structure elements are referenced by the knowledge module
Path
Library.dataRequirement.DataRequirement.mustSupport
Id
DataRequirement.mustSupport
Type
Cardinality
0 - *
Definition
Indicates that specific elements of the type are referenced by the knowledge module and must be supported by the consumer in order to obtain an effective evaluation. This does not mean that a value is required for this element, only that the consuming system must understand the element and be able to provide values for it if they are available. Note that the value for this element can be a path to allow references to nested elements. In that case, all the elements along the path must be supported.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter
Id
DataRequirement.codeFilter
Type
Cardinality
0 - *
Definition
Code filters specify additional constraints on the data, specifying the value set of interest for a particular element of the data.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Library.dataRequirement.DataRequirement.codeFilter.path
Id
DataRequirement.codeFilter.path
Type
Cardinality
1 - 1
Definition
The code-valued attribute of the filter. The specified path must be resolvable from the type of the required data. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements. Note that the index must be an integer constant. The path must resolve to an element of type code, Coding, or CodeableConcept.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter.valueSet[x]
Id
DataRequirement.codeFilter.valueSet[x]
Type
Cardinality
0 - 1
Definition
The valueset for the code filter. The valueSet and value elements are exclusive. If valueSet is specified, the filter will return only those data items for which the value of the code-valued element specified in the path is a member of the specified valueset.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCode
Id
DataRequirement.codeFilter.valueCode
Type
Cardinality
0 - *
Definition
The codes for the code filter. Only one of valueSet, valueCode, valueCoding, or valueCodeableConcept may be specified. If values are given, the filter will return only those data items for which the code-valued attribute specified by the path has a value that is one of the specified codes.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding
Id
DataRequirement.codeFilter.valueCoding
Type
Cardinality
0 - *
Definition
The Codings for the code filter. Only one of valueSet, valueCode, valueConding, or valueCodeableConcept may be specified. If values are given, the filter will return only those data items for which the code-valued attribute specified by the path has a value that is one of the specified Codings.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCoding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCodeableConcept
Id
DataRequirement.codeFilter.valueCodeableConcept
Type
Cardinality
0 - *
Definition
The CodeableConcepts for the code filter. Only one of valueSet, valueCode, valueConding, or valueCodeableConcept may be specified. If values are given, the filter will return only those data items for which the code-valued attribute specified by the path has a value that is one of the specified CodeableConcepts.
Comment
Path
Library.dataRequirement.DataRequirement.codeFilter.valueCodeableConcept.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.
Path
Library.dataRequirement.DataRequirement.dateFilter
Id
DataRequirement.dateFilter
Type
Cardinality
0 - *
Definition
Date filters specify additional constraints on the data in terms of the applicable date range for specific elements.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
Library.dataRequirement.DataRequirement.dateFilter.path
Id
DataRequirement.dateFilter.path
Type
Cardinality
1 - 1
Definition
The date-valued attribute of the filter. The specified path must be resolvable from the type of the required data. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements. Note that the index must be an integer constant. The path must resolve to an element of type dateTime, Period, Schedule, or Timing.
Comment
Path
Library.dataRequirement.DataRequirement.dateFilter.value[x]
Id
DataRequirement.dateFilter.value[x]
Type
Cardinality
0 - 1
Definition
The value of the filter. If period is specified, the filter will return only those data items that fall within the bounds determined by the Period, inclusive of the period boundaries. If dateTime is specified, the filter will return only those data items that are equal to the specified dateTime. If a Duration is specified, the filter will return only those data items that fall within Duration from now.
Comment
Path
Library.content
Id
Library.content
Type
Cardinality
0 - *
Definition
The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content.
Comment
Path
Library.content.Attachment.contentType
Id
Attachment.contentType
Type
Cardinality
0 - 1
Definition
Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.
Comment
Requirements
Processors of the data need to be able to know how to interpret the data.
Path
Library.content.Attachment.data
Id
Attachment.data
Type
Cardinality
0 - 1
Definition
The actual data of the attachment - a sequence of bytes. In XML, represented using base64.
Comment
The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.
Requirements
The data needs to able to be transmitted inline.
Path
Library.content.Attachment.url
Id
Attachment.url
Type
Cardinality
0 - 1
Definition
An alternative location where the data can be accessed.
Comment
If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.
Requirements
The data needs to be transmitted by reference.
Path
Library.content.Attachment.size
Id
Attachment.size
Type
Cardinality
0 - 1
Definition
The number of bytes of data that make up this attachment (before base64 encoding, if that is done).
Comment
The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.
Requirements
Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.
Path
Library.content.Attachment.hash
Id
Attachment.hash
Type
Cardinality
0 - 1
Definition
The calculated hash of the data using SHA-1. Represented using base64.
Comment
The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded.
Requirements
Included so that applications can verify that the contents of a location have not changed and so that a signature of the content can implicitly sign the content of an image without having to include the data in the instance or reference the url in the signature.
Path
Library.content.Attachment.title
Id
Attachment.title
Type
Cardinality
0 - 1
Definition
A label or set of text to display in place of the data.
Comment
Requirements
Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.
Path
Library.content.Attachment.creation
Id
Attachment.creation
Type
Cardinality
0 - 1
Definition
The date that the attachment was first created.
Comment
Requirements
This is often tracked as an integrity issue for use of the attachment.