Summary
Diagnostics
Care Provision
Request & Response
Medications
Workflow
Entities
Management
Individuals
General
Billing
Support
Payment
Security
Other
Conformance
Documents
Terminology
Definitional Artifacts
Medication Definition
Evidence-Based Medicine
Quality Reporting & Testing
Public Health & Research
Complex
Primitive
ActivityDefinition
CapabilityStatement
ChargeItemDefinition
Claim
CodeSystem
Composition
ConceptMap
CoverageEligibilityRequest
Encounter
Group
Library
List
Measure
MedicinalProductDefinition
MessageHeader
NamingSystem
Observation
Patient
PlanDefinition
Resource
StructureDefinition
StructureMap
ValueSet
default
A record of a device being used by a patient where the record is the result of a report from the patient or another clinician.
DeviceUseStatement
Path
DeviceUseStatement
Id
DeviceUseStatement
Cardinality
0 - *
Definition
A record of a device being used by a patient where the record is the result of a report from the patient or another clinician.
Comment
Constraint
dom-2 [error]
If the resource is contained in another resource, it SHALL NOT contain nested Resources
dom-3 [error]
If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
dom-4 [error]
If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
dom-5 [error]
If a resource is contained in another resource, it SHALL NOT have a security label
dom-6 [warning]
A resource should have narrative for robust management
Path
DeviceUseStatement.identifier
Id
DeviceUseStatement.identifier
Type
Cardinality
0 - *
Definition
An external identifier for this statement such as an IRI.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.type.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn
Id
DeviceUseStatement.basedOn
Type
Cardinality
0 - *
Definition
A plan, proposal or order that is fulfilled in whole or in part by this DeviceUseStatement.
Comment
Requirements
Allows tracing of authorization for the DeviceUseStatement and tracking whether proposals/recommendations were acted upon.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.basedOn.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.basedOn.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.status
Id
DeviceUseStatement.status
Type
Cardinality
1 - 1
Definition
A code representing the patient or other source's judgment about the state of the device used that this statement is about. Generally this will be active or completed.
Comment
DeviceUseStatment is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for contains codes that assert the status of the use by the patient (for example, stopped or on hold) as well as codes that assert the status of the resource itself (for example, entered in error).
This element is labeled as a modifier because the status contains the codes that mark the statement as not currently valid.
Binding
Strength
required
Description
A coded concept indicating the current status of the Device Usage.
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject
Id
DeviceUseStatement.subject
Type
Cardinality
1 - 1
Definition
The patient who used the device.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.subject.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.subject.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom
Id
DeviceUseStatement.derivedFrom
Type
Cardinality
0 - *
Definition
Allows linking the DeviceUseStatement to the underlying Request, or to other information that supports or is used to derive the DeviceUseStatement.
Comment
The most common use cases for deriving a DeviceUseStatement comes from creating it from a request or from an observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the DeviceUseStatement from.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.derivedFrom.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.derivedFrom.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x]
Id
DeviceUseStatement.timing[x]
Type
Cardinality
0 - 1
Definition
How often the device was used.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.event
Id
Timing.event
Type
Cardinality
0 - *
Definition
Identifies specific times when the event occurs.
Comment
Requirements
In a Medication Administration Record, for instance, you need to take a general specification, and turn it into a precise specification.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat
Id
Timing.repeat
Type
Cardinality
0 - 1
Definition
A set of rules that describe when the event is scheduled.
Comment
Requirements
Many timing schedules are determined by regular repetitions.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children unless an empty Parameters resource
tim-1 [error]
if there's a duration, there needs to be duration units
tim-2 [error]
if there's a period, there needs to be period units
tim-4 [error]
duration SHALL be a non-negative value
tim-5 [error]
period SHALL be a non-negative value
tim-6 [error]
If there's a periodMax, there must be a period
tim-7 [error]
If there's a durationMax, there must be a duration
tim-8 [error]
If there's a countMax, there must be a count
tim-9 [error]
If there's an offset, there must be a when (and not C, CM, CD, CV)
tim-10 [error]
If there's a timeOfDay, there cannot be a when, or vice versa
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x]
Id
Timing.repeat.bounds[x]
Type
Cardinality
0 - 1
Definition
Either a duration for the length of the timing schedule, a range of possible length, or outer bounds for start and/or end limits of the timing schedule.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x].Duration.value
Id
Duration.value
Type
Cardinality
0 - 1
Definition
The value of the measured amount. The value includes an implicit precision in the presentation of the value.
Comment
The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).
Requirements
Precision is handled implicitly in almost all cases of measurement.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x].Duration.comparator
Id
Duration.comparator
Type
Cardinality
0 - 1
Definition
How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.
Comment
Requirements
Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.
Binding
Strength
required
Description
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x].Duration.unit
Id
Duration.unit
Type
Cardinality
0 - 1
Definition
A human-readable form of the unit.
Comment
Requirements
There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x].Duration.system
Id
Duration.system
Type
Cardinality
0 - 1
Definition
The identification of the system that provides the coded form of the unit.
Comment
Requirements
Need to know the system that defines the coded form of the unit.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
qty-3
Path
DeviceUseStatement.timing[x].Timing.repeat.bounds[x].Duration.code
Id
Duration.code
Type
Cardinality
0 - 1
Definition
A computer processable form of the unit in some unit representation system.
Comment
The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.
Requirements
Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.count
Id
Timing.repeat.count
Type
Cardinality
0 - 1
Definition
A total count of the desired number of repetitions across the duration of the entire timing specification. If countMax is present, this element indicates the lower bound of the allowed range of count values.
Comment
If you have both bounds and count, then this should be understood as within the bounds period, until count times happens.
Requirements
Repetitions may be limited by end time or total occurrences.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.countMax
Id
Timing.repeat.countMax
Type
Cardinality
0 - 1
Definition
If present, indicates that the count is a range - so to perform the action between [count] and [countMax] times.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.duration
Id
Timing.repeat.duration
Type
Cardinality
0 - 1
Definition
How long this thing happens for when it happens. If durationMax is present, this element indicates the lower bound of the allowed range of the duration.
Comment
For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).
Requirements
Some activities are not instantaneous and need to be maintained for a period of time.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.durationMax
Id
Timing.repeat.durationMax
Type
Cardinality
0 - 1
Definition
If present, indicates that the duration is a range - so to perform the action between [duration] and [durationMax] time length.
Comment
For some events the duration is part of the definition of the event (e.g. IV infusions, where the duration is implicit in the specified quantity and rate). For others, it's part of the timing specification (e.g. exercise).
Requirements
Some activities are not instantaneous and need to be maintained for a period of time.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.durationUnit
Id
Timing.repeat.durationUnit
Type
Cardinality
0 - 1
Definition
The units of time for the duration, in UCUM units.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.frequency
Id
Timing.repeat.frequency
Type
Cardinality
0 - 1
Definition
The number of times to repeat the action within the specified period. If frequencyMax is present, this element indicates the lower bound of the allowed range of the frequency.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.frequencyMax
Id
Timing.repeat.frequencyMax
Type
Cardinality
0 - 1
Definition
If present, indicates that the frequency is a range - so to repeat between [frequency] and [frequencyMax] times within the period or period range.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.period
Id
Timing.repeat.period
Type
Cardinality
0 - 1
Definition
Indicates the duration of time over which repetitions are to occur; e.g. to express "3 times per day", 3 would be the frequency and "1 day" would be the period. If periodMax is present, this element indicates the lower bound of the allowed range of the period length.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.periodMax
Id
Timing.repeat.periodMax
Type
Cardinality
0 - 1
Definition
If present, indicates that the period is a range from [period] to [periodMax], allowing expressing concepts such as "do this once every 3-5 days.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.periodUnit
Id
Timing.repeat.periodUnit
Type
Cardinality
0 - 1
Definition
The units of time for the period in UCUM units.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.dayOfWeek
Id
Timing.repeat.dayOfWeek
Type
Cardinality
0 - *
Definition
If one or more days of week is provided, then the action happens only on the specified day(s).
Comment
If no days are specified, the action is assumed to happen every day as otherwise specified. The elements frequency and period cannot be used as well as dayOfWeek.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.timeOfDay
Id
Timing.repeat.timeOfDay
Type
Cardinality
0 - *
Definition
Specified time of day for action to take place.
Comment
When time of day is specified, it is inferred that the action happens every day (as filtered by dayofWeek) on the specified times. The elements when, frequency and period cannot be used as well as timeOfDay.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.when
Id
Timing.repeat.when
Type
Cardinality
0 - *
Definition
An approximate time period during the day, potentially linked to an event of daily living that indicates when the action should occur.
Comment
When more than one event is listed, the event is tied to the union of the specified events.
Requirements
Timings are frequently determined by occurrences such as waking, eating and sleep.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.repeat.offset
Id
Timing.repeat.offset
Type
Cardinality
0 - 1
Definition
The number of minutes from the event. If the event code does not indicate whether the minutes is before or after the event, then the offset is assumed to be after the event.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code
Id
Timing.code
Type
Cardinality
0 - 1
Definition
A code for the timing schedule (or just text in code.text). Some codes such as BID are ubiquitous, but many institutions define their own additional codes. If a code is provided, the code is understood to be a complete statement of whatever is specified in the structured timing data, and either the code or the data may be used to interpret the Timing, with the exception that .repeat.bounds still applies over the code (and is not contained in the code).
Comment
BID etc. are defined as 'at institutionally specified times'. For example, an institution may choose that BID is "always at 7am and 6pm". If it is inappropriate for this choice to be made, the code BID should not be used. Instead, a distinct organization-specific code should be used in place of the HL7-defined BID code and/or a structured representation should be used (in this case, specifying the two event times).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.timing[x].Timing.code.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.recordedOn
Id
DeviceUseStatement.recordedOn
Type
Cardinality
0 - 1
Definition
The time at which the statement was made/recorded.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source
Id
DeviceUseStatement.source
Type
Cardinality
0 - 1
Definition
Who reported the device was being used by the patient.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.source.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.source.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.source.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.source.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.source.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device
Id
DeviceUseStatement.device
Type
Cardinality
1 - 1
Definition
The details of the device used.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.device.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.device.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.device.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.device.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.device.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode
Id
DeviceUseStatement.reasonCode
Type
Cardinality
0 - *
Definition
Reason or justification for the use of the device.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonCode.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference
Id
DeviceUseStatement.reasonReference
Type
Cardinality
0 - *
Definition
Indicates another resource whose existence justifies this DeviceUseStatement.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.reasonReference.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.type.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.period.Period.start
Id
Period.start
Type
Cardinality
0 - 1
Definition
The start of the period. The boundary is inclusive.
Comment
If the low element is missing, the meaning is that the low boundary is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.period.Period.end
Id
Period.end
Type
Cardinality
0 - 1
Definition
The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Comment
The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
per-1
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.assigner.Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.assigner.Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.assigner.Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.identifier.Identifier.assigner.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.reasonReference.Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite
Id
DeviceUseStatement.bodySite
Type
Cardinality
0 - 1
Definition
Indicates the anotomic location on the subject's body where the device was used ( i.e. the target).
Comment
Requirements
Knowing where the device is targeted is important for tracking if multiple sites are possible. If more information than just a code is required, use the extension [http://hl7.org/fhir/StructureDefinition/bodySite](extension-bodysite.html).
Binding
Strength
example
Description
SNOMED CT Body site concepts
ValueSet
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding
Id
CodeableConcept.coding
Type
Cardinality
0 - *
Definition
A reference to a code defined by a terminology system.
Comment
Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Requirements
Allows for alternative encodings within a code system, and translations to other code systems.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding.Coding.system
Id
Coding.system
Type
Cardinality
0 - 1
Definition
The identification of the code system that defines the meaning of the symbol in the code.
Comment
The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Requirements
Need to be unambiguous about the source of the definition of the symbol.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding.Coding.version
Id
Coding.version
Type
Cardinality
0 - 1
Definition
The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Comment
Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding.Coding.code
Id
Coding.code
Type
Cardinality
0 - 1
Definition
A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Comment
Requirements
Need to refer to a particular code in the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding.Coding.display
Id
Coding.display
Type
Cardinality
0 - 1
Definition
A representation of the meaning of the code in the system, following the rules of the system.
Comment
Requirements
Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.bodySite.CodeableConcept.coding.Coding.userSelected
Id
Coding.userSelected
Type
Cardinality
0 - 1
Definition
Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Comment
Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Requirements
This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note
Id
DeviceUseStatement.note
Type
Cardinality
0 - *
Definition
Details about the device statement that were not represented at all or sufficiently in one of the attributes provided in a class. These may include for example a comment, an instruction, or a note associated with the statement.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x]
Id
Annotation.author[x]
Type
Cardinality
0 - 1
Definition
The individual responsible for making the annotation.
Comment
Organization is used when there's no need for specific attribution as to who made the comment.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.reference
Id
Reference.reference
Type
Cardinality
0 - 1
Definition
A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.
Comment
Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Condition
ref-1
Path
DeviceUseStatement.note.Annotation.author[x].Reference.type
Id
Reference.type
Type
Cardinality
0 - 1
Definition
The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.
The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).
Comment
This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier
Id
Reference.identifier
Type
Cardinality
0 - 1
Definition
An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.
Comment
When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.
When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference
Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.use
Id
Identifier.use
Type
Cardinality
0 - 1
Definition
The purpose of this identifier.
Comment
Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Requirements
Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.type
Id
Identifier.type
Type
Cardinality
0 - 1
Definition
A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Comment
This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Requirements
Allows users to make use of identifiers when the identifier system is not known.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.system
Id
Identifier.system
Type
Cardinality
0 - 1
Definition
Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Comment
Identifier.system is always case sensitive.
Requirements
There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.value
Id
Identifier.value
Type
Cardinality
0 - 1
Definition
The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Comment
If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the [Rendered Value extension](extension-rendered-value.html). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.period
Id
Identifier.period
Type
Cardinality
0 - 1
Definition
Time period during which identifier is/was valid for use.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.identifier.Identifier.assigner
Id
Identifier.assigner
Type
Cardinality
0 - 1
Definition
Organization that issued/manages the identifier.
Comment
The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.author[x].Reference.display
Id
Reference.display
Type
Cardinality
0 - 1
Definition
Plain text narrative that identifies the resource in addition to the resource reference.
Comment
This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
Constraint
ele-1 [error]
All FHIR elements must have a @value or children
Path
DeviceUseStatement.note.Annotation.time
Id
Annotation.time
Type
Cardinality
0 - 1
Definition
Indicates when this particular annotation was made.
Comment
Constraint
ele-1 [error]
All FHIR elements must have a @value or children